SkyCivソフトウェアのガイド - チュートリアル, ハウツーガイドと技術記事


  1. ホーム
  2. SkyCiv構造3D
  3. 解決する
  4. 線形静解析


修理 3

Linear Static analysis is the default analysis method that SkyCiv’s Structural 3D uses to analyze structures. Compared with non-linear analysis, linear analysis is an efficient method of solving a structure as it assumes the structure to behave in an elastic manner.

Linear static analysis has two main assumptions:

  • The structure’s behavior is linear (must obey Hooke’s Law).
    • Forces are linearly proportional to deformation. If you double the loads, the response (変位, strains, ストレス) also doubles. 応力は歪みに比例します.
    • When the loading is removed the material must return to its original shape. (No plastic deformation).
    • Boundary conditions do not vary during the application of loads.
  • The loading is static.
    • Magnitude and direction do not change with time.
    • All loads are applied slowly and gradually until they reach their full magnitudes. Inertial and damping properties are ignored due to negligibly small accelerations and velocities.
    • Time variant loads that induce considerable inertial and/or damping forces may warrant dynamic analysis.

頻繁, linear analysis is sufficient for the solution of most structures with the structures themselves assumed to have small deformations. Note that modern design codes are written in such a way that there is a large factor of safety already accounted for in the design of a structural element. As the assumptions are elastic, this makes it most ideal with structures that are made of Hookean materials such as steel.

はい 番号