SkyCivソフトウェアのガイド - チュートリアル, ハウツーガイドと技術記事


  1. ホーム
  2. SkyCiv擁壁
  3. 入門



SkyCiv Retaining Wall Software performs analysis and design calculations on concrete retaining walls, making it possible to easily run stability checks and download a detailed report for those calculations. ソフトウェアをダウンロードしてインストールする必要はありませんsimply access it using the preferred web browser anytime and anywhere as long as an internet connection is available. You can start using the 無料の擁壁計算機 or the Standalone Retaining Wall Calculator which you can access from the Dashboard.

Supported Retaining Wall Types

Our Retaining Wall Block Calculator currently supports the following Retaining Wall types:

  • カンチレバー擁壁
  • 重力擁壁

Stability checks

Using our Retaining Wall Software, you can perform and get a detailed report for the following:

  • 計算を覆す: To ensure that the structure is safe against moment actions generated by forces acting on the wall.
  • スライディング計算: To check that the concrete retaining wall has enough capacity from any lateral force that may cause sliding.
  • ベアリングの計算: To ensure the soil has enough bearing capacity to withstand the forces from the retaining wall.

Using the Retaining Wall Software

ユーザーインターフェイスは、結果をモデル化および視覚化するための非常に明確でスムーズなワークフローを提供します. You will need to define geometrical properties for the stem and the base, set mechanical properties for the different soil materials interacting with the Wall, place the soil layers for the Passive, 下部構造土, and Substructure zones, add surcharge distributed loads and finally, analyze the Retaining Wall to visualize the results in a clean summary report or in a detailed report.


ステップ 1 – Define the stem and base geometry

Using the first two buttons in the left-hand side panel, you can define the values for the stem offset, width and height as well as the thickness and width of the base. Each of those length values correspond to the actual concrete retaining wall geometry as shown in the following image:

Cantilever Concrete Retaining Wall geometry with dimensions

ステップ 2 – Create different soil materials

Using the third button “材料” in the left-hand side panel you can enter to the soil material definition panel. 三, you define the name, and the visual and mechanical properties for each soil type you will be using to bear the concrete retaining wall and to be retained by the cantilever wall. The Soil Type dropdown menu lists all the defined soil types, next to it, you can find the add and delete buttons. For each soil type it is possible to define a descriptive name and a color to be displayed in the renderer. As for the mechanical properties, those are:

  • Required properties for all soil types
    • 摩擦角: Used for calculating the lateral pressure the retained soil exerts on the wall.
    • 単位重量: Used for calculating the vertical and lateral pressures the retained soil exerts on the wall.
  • ために cohesive soil のみ
    • Soil cohesion: Used for calculating the lateral pressure the retained soil exerts on the wall.
  • For soil materials used in the substructure
    • Allowable Bearing Pressure: Used for determining if the soil in the substructure will not fail under the vertical load applied.
    • Concrete-Soil Friction Coefficient: Used for determining the horizontal resisting force against all the applied horizontal load.

ステップ 4 – Assign a material to each soil zone

Once all the materials to be used are defined, assign one to each of the soil zone: 下部構造土, 下部構造土, 下部構造土. また, define the height:


Skyciv cantilever concrete retaining wall showing soil zonesステップ 3 – Add a surcharge load value

Using the last button in the left-hand side menu you can modify the value of the surcharge load. This load will be a distributed one, acting along the top of the Active Soil Zone.

ステップ 4 – Analyze and visualize the results

After all the geometry, mechanical and load properties are defined for the Retaining Wall model, it is time to run a analysis using the green Analyze button and have a look at the results. In the results view, you can visualize at a glance the following stability checks:

  • 転覆:
    • Factor of safety against overturning
    • Recommended factor of safety against overturning
    • Sum of resisting moments
    • Sum of overturning moments
  • スライディング:
    • Factor of safety against sliding
    • Recommended factor of safety against sliding
    • Sum of forces resisting
    • Sum of forces driving
  • ベアリング:
    • Factor of safety for bearing
    • Recommended factor of safety for bearing
    • Maximum pressure
    • Ultimate bearing capacity

最後に, you can also review a detailed report for all the calculations made for checking stability in the Concrete Cantilever Retaining Wall and download it both in PDF and HTML format. This report can be used to review the calculations made by the software or as a deliverable for your project.

Screenshot of the detailed report for stability checks calculations of a concrete retaining wall

Customer support

プロのユーザーは、下隅にある小さな青いアイコンからライブチャットにアクセスすることもできます. すべてのニーズに対応できる本物のエンジニアに相談してください. さもないと, [email protected]までメールでお問い合わせください。フレンドリーなエンジニアが喜んでお手伝いいたします。!

はい 番号