Retaining Wall Calculation Verification – Cantilever in cemento armato – metrico
The data used in this verification example and the results to compare with SkyCiv Software per la progettazione di muri di contenimento were from: Il manuale di progettazione del cemento armato, ACI SP-17(14), Vol. 2, p. 62. All the input data and results were converted to metric units using known conversion factors for the purpose of this verification.
Dati in ingresso
Stelo
- Altezza: 3.124 m
- Larghezza: 0.305 m
- Compensare: 0.686 m
Base
- Larghezza: 2.210 m
- Spessore: 0.381 m
Suolo attivo e passivo
- Unità di peso: 18.85 kN / m3
- Angolo di attrito: 35 gradi
Angolo di attrito
- Unità di peso: 18.85 kN / m3
- Angolo di attrito: 35 gradi
- Angolo di attrito: 0.55
- Angolo di attrito: 143.641 kPa
Angolo di attrito:
- Attivo: 3.505 m
- Angolo di attrito: 0.975 m
- Angolo di attrito: 0.792 m
Angolo di attrito: -17.237 kN / m
risultati
After creating the model in the SkyCiv Retaining Wall Software it was solved. The following table shows the results obtained using the software and the ones reported in Il manuale di progettazione del cemento armato. All the results were converted to metric units keeping in mind that the depth of the model is now 1 m and for the model in imperial units was 1 ft:
unità | ACI Manual | SkyCiv | Differenza | |
---|---|---|---|---|
Overturning | ||||
Sum of vertical loads | kN |
135.096
|
135.118 | 0.02% |
Angolo di attrito | kN * m |
189.250
|
189.298 | 0.03% |
Sum of horizontal loads | kN |
47.751
|
47.749 | 0.00% |
cdot K_a | kN * m |
65.358
|
65.351 | -0.01% |
FoS | – |
2.900
|
2.897 | -0.10% |
Sliding | ||||
FoS | – |
1.560
|
1.556 | 0.26% |
Bearing | ||||
Distance of the resultant | m |
0.917
|
0.917 | -0.05% |
Eccentricity | m | 0.189 | 0.188 | -0.52% |
Maximum Pressure | kPa |
92.505
|
92.291 | -0.23% |
Minimum Pressure | kPa |
29.782
|
29.987 | 0.69% |
FoS | – |
1.550
|
1.556 | 0.39% |