SkyCiv Structural 3D (S3D) is cloud-based structural analysis and design software for modelling, analyzing and designing 3D structures in your web browser. This page gives an overview of what Structural 3D can do, how to launch it, and the typical workflow from building a model to designing its members.
What Is SkyCiv Structural 3D?
SkyCiv Structural 3D is a full finite element analysis (BRUTTA) program for frames, capriate, plates and shells, built around an interface that is quick to learn. You can model a structure with members, piastre e cavi, apply loads and load combinations, solve it, review the results, and then design it to the code of your region, tutto in un unico posto.
It can run the following analysis types:
- Linear static
- Linear static with buckling
- Non-linear static with P-Delta
- Dynamic frequency (modal)
- Spettro di risposta
The design modules check steel, acciaio formato a freddo, timber and reinforced concrete members, reinforced concrete plates and steel connections to US, europeo, Australiano, Nuova Zelanda, canadese, UK, Indian and other design standards, depending on the module.
Launching Structural 3D
There is nothing to download or install: Structural 3D runs entirely in your web browser, and your models are saved to your SkyCiv cloud storage. To launch it, accesso to your SkyCiv account and open Structural 3D from your dashboard. From there you can start a new model or open one you have already saved.
Navigating the Interface
The interface is split into three stages, shown as Modello, Risolvi e Progettazione nell'angolo in alto a destra. You work through them in that order, and you can go back to the model at any time to make changes.
- Modello: the buttons on the left build the structure (Nodi, Elementi, Piastre, Vincoli, Materiali, Sezioni) and load it (Carichi puntuali, momenti, Carichi distribuiti, Carichi di area, pressioni, Peso proprio, Carica gruppi & Casi e Combinazioni di carico). Masse nodali e Carichi spettrali are there for dynamic analysis.
- Risolvi: runs the analysis and switches to the results view. Fai clic su Edit Model to go back to the model.
- Progettazione: opens the design modules, where you check the members of the solved model against a design code.
The top menu holds the rest of the tools: File (Aperto, save and import or export models), Modifica (operations such as Repeat, Mirror and Rotate, the datasheets, groups and template assemblies), Utensili (Modello di riparazione, Linee della griglia & elevazioni, Measure Tool and more), Produzione (3D Renderer, Rapporto di analisi, CSV results and drawings) e Impostazioni (units and other model and display settings).
Structural 3D Workflow
As in most structural engineering software, the workflow is to model the structure, applicare carichi, solve it and review the results, then design it. The documentation follows these same steps.
Step 1: Modella la struttura
Start by aggiunta di nodi: the points in 3D space that connect your members, piastre, supporti e carichi. Then join them with members and plates, and assign their sections and materials. You can also draw members directly with the pen tool, build parts of the model from template assemblies, or import a model from another program. Infine, add supports to restrain the structure: a model without enough supports is unstable and will not solve.
Step 2: Apply Loads
Apply the loads on your structure: punti di carico, momenti, carichi distribuiti, carichi superficiali, plate pressures and self weight. Each load belongs to a load group, and the load groups are combined in load combinations. Il Generatore di combinazione di carico creates the combinations for you from a design code, so you don’t need to enter the load factors by hand. Vento, snow and seismic loads can be calculated with the integrated load generator.
Step 3: Solve and Review the Results
Fai clic su Risolvi to run a linear static analysis, or open the Risolvi menu to pick another analysis type (instabilità, P-Delta, dynamic frequency or response spectrum). If the model doesn’t solve, il elenco di errori explains the common causes, che per il Modello di riparazione tool finds and fixes many of them, such as duplicate members or nodes that are very close together.
Una volta risolto, review reactions, spostamenti, member forces (taglio, momento flettente, assiale e di torsione), stresses and plate results on the model, or look at a single member in detail. You can then generate an analysis report, export the results to CSV, or create drawings.
Step 4: Progettazione
Apri il Progettazione menu and click Inizia nuovo codice to choose a design module:
- Di seguito è riportato un esempio di alcuni calcoli della piastra di base americana comunemente utilizzati nella progettazione della piastra di base: compreso AISC 360, Eurocodice 3, AS 4100, CSA S16, BS 5950, NZS 3404 ed è 800
- Membro in acciaio formato a freddo: AISI S100, AS / NZS 4600 ed Eurocodice (NEL 1993-1-3)
- Membro del legname: NDS 2018 e AS 1720
- Membro in cemento armato: compreso ACI 318, AS 3600, CSA A23.3, Eurocodice 2 e NZS 3101
- Reinforced Concrete Plate: ACI 318, Eurocodice 2 e AS 3600
- Steel Connection Design: AISC 360 ed Eurocodice (NEL 1993-1-8)
Each module checks the members of your model against the load combinations of the analysis and produces a design report. Il Progettista di sezione (GSD) in the same menu designs a single cross-section.
Getting Help
We’ve built Structural 3D to be easy to pick up, but learning new software takes some time, so help is available along the way:
- Tooltips: hover over the info icons next to inputs for a short explanation of what they do.
- Assistente AI: il Assistente AI in the bottom right corner can build or modify your model, query results, diagnose a model that won’t solve, e rispondere alle domande sull'utilizzo di SkyCiv.
- Example videos: watch SkyCiv examples to see how engineers model, analyze and design real structures step by step, and follow along with your own model.
- Servizio Clienti: Professional users can chat live with a SkyCiv engineer from within the software. You can also email us at [email protected] and one of our engineers will be happy to help.