Retaining Wall Calculation Verification – Reinforced concrete cantilever – Imperiale
The data used in this verification example and the results to compare with SkyCiv Software per la progettazione di muri di contenimento were taken from: Il manuale di progettazione del cemento armato, ACI SP-17(14), Vol. 2, p. 24. This model is particularly interesting because it is a cantilever concrete Retaining Wall with no surcharge applied on the active soil zone.
Dati in ingresso
Stelo
- Altezza: 16 ft 9 nel (16.75 ft)
- Larghezza: 1 ft 3 nel (1.25 ft)
- Compensare: 2 ft 6 nel (2.5 ft)
Base
- Larghezza: 9 ft 3 nel (9.25 ft)
- Spessore: 1 ft 3 nel (1.25 ft)
Suolo attivo e passivo
- Unità di peso: 110 pcf (0.11 kcf)
- Angolo di attrito: 35 gradi
Angolo di attrito
- Unità di peso: 110 pcf (0.11 kcf)
- Angolo di attrito: 35 gradi
- Angolo di attrito: 0.5
- Angolo di attrito: 3000 PSF (3 ksf)
Angolo di attrito:
- Attivo: 18 ft (18.0 ft)
- Angolo di attrito: 3 ft
- Angolo di attrito: 3 ft
Angolo di attrito: 0 PSF (0.00 ksf)
risultati
After creating the model in the SkyCiv Retaining Wall Software it was solved. The following table shows the results obtained using the software and the ones reported in Il manuale di progettazione del cemento armato:
unità | ACI Manual | SkyCiv | Differenza | |
---|---|---|---|---|
Overturning | ||||
Sum of vertical loads | kip | 15.008 | 15.012 | 0.03% |
Angolo di attrito | kip * ft | 83.704 | 83.718 | 0.02% |
Sum of horizontal loads | kip | 4.829 | 4.829 | 0.00% |
cdot K_a | kip * ft | 28.974 | 28.974 | 0.00% |
FoS | – | 2.890 | 2.889 | -0.03% |
Sliding | ||||
FoS | – | 1.550 | 1.554 | 0.26% |
Bearing | ||||
Distance of the resultant | ft | 3.650 | 3.647 | -0.08% |
Eccentricity | ft | 0.980 | 0.978 | -0.20% |
Maximum Pressure | ksf | 2.653 | 2.653 | 0.00% |
Minimum Pressure | ksf | 0.591 | 0.593 | 0.34% |
FoS | – | 1.131 | 1.131 | 0.02% |