Documentação SkyCiv

Seu guia para o software SkyCiv - tutoriais, guias de instruções e artigos técnicos

TechNotes

  1. Casa
  2. TechNotes
  3. Modelos de verificação S3D
  4. Verificação SJI

Verificação SJI

SJI Joist Selection Verification Tests

In order to validate the SJI module developed verification tests were undertaken. Série K, A série LH e a série DLH foram todas testadas em ambas as funcionalidades pick and check.

A funcionalidade de coleta determina uma designação de viga válida e calcula a relação de utilidade com base na carga especificada e nas condições dimensionais. O algoritmo de busca seleciona uma viga válida enquanto minimiza a massa por pé.

The check functionality calculates the utility of a proposed joist designation based on specified load and dimensional conditions.

Direct testing of the pick functionality was far more comprehensive than direct testing of the check functionality. This is justified as the check functionality is completed after a valid joist is selected to return the utility ratio. The check functionality is therefore implicitly tested during the pick function tests.

The term No Solution means a valid joist could not be found based on the design criteria given (carregar, profundidade, etc…)

K Series Tests

Test No. Funcionalidade
Tested
Máx.
Profundidade (no)
Período
(ft)
Provision
lrfd
Carregar
(lb / ft)
SJI Table Result Resultado SkyCiv SkyCiv
Utility Ratio
1 Escolher 40 31.848 LRFD Fatorado 600 28K6 28K6 0.897
2 Escolher 18 31.848 LRFD Fatorado 600 18K10 18K10 0.897
3 Escolher 40 21.5 ASD Fatorado 550 20K4 20K4 1
4 Escolher 40 21.5 LRFD Fatorado 550 18K3 18K3 0.96
5 Escolher 30 31.5 ASD sem fator 550 No Result No Solution No Solution
6 Verificar 18 31.848 LRFD Fatorado 600 0.897 18K10 0.897

LH Series Tests

Test No. Funcionalidade
Tested
Max Depth
(no)
Período
(ft)
Provision Factor Carregar
(lb / ft)
SJI Table Result Resultado SkyCiv SkyCiv
Utility Ratio
1 Escolher 40 23 ASD sem fator 1000 20LH08 20LH08 0.97
2 Escolher 19 23 ASD sem fator 1000 18LH09 18LH09 0.946
3 Escolher 40 23 LRFD não fatorado 2000 No Result No Solution No Solution
4 Escolher 40 31.484 ASD sem fator 600 24LH06 24LH06 0.906
5 Verificar 31.484 LRFD não fatorado 1650 0.998 28LH06 0.998
6 Escolher 22 50 ASD Fatorado 1000 No Result No Solution No Solution
7 Escolher 22 15.24 m ASD sem fator 14.594 kN / m 24LH06 24LH06 0.906
8 Escolher 40 31.484 ASD sem fator 600 24LH06 24LH06 0.906

DLH Series Tests

Test No. Funcionalidade
Tested
Máx.
Profundidade (no)
Período
(ft)
Provision
lrfd
Carregar
(lb / ft)
SJI Table Result Resultado SkyCiv SkyCiv
Utility Ratio
1 Escolher 160 120 LRFD não fatorado 1000 88DLH19 88DLH19 0.908
2 Escolher 160 120 LRFD Fatorado 1000 96DLH19 96DLH19 0.876
3 Escolher 160 120 ASD Fatorado 1000 96DLH21 96DLH21 0.93
4 Escolher 160 23 ASD sem fator 2000 No Result No Solution No Solution
5 Escolher 160 23 LRFD não fatorado 2000 88DLH21 88DLH21 0.896
Este artigo foi útil para você?
sim Não

Como podemos ajudar?

Vá para o topo