Τεκμηρίωση SkyCiv

Ο οδηγός σας για το λογισμικό SkyCiv — σεμινάρια, οδηγοί και τεχνικά άρθρα

Εισαγωγή στο SkyCiv Structural 3D

SkyCiv Structural 3D (S3D) is cloud-based structural analysis and design software for modelling, analyzing and designing 3D structures in your web browser. This page gives an overview of what Structural 3D can do, how to launch it, and the typical workflow from building a model to designing its members.

What Is SkyCiv Structural 3D?

SkyCiv Structural 3D is a full finite element analysis (ΑΣΧΗΜΟΣ) program for frames, δοκάρια, plates and shells, built around an interface that is quick to learn. You can model a structure with members, πλάκες και καλώδια, apply loads and load combinations, solve it, review the results, and then design it to the code of your region, όλα σε ένα μέρος.

It can run the following analysis types:

  • Linear static
  • Linear static with buckling
  • Non-linear static with P-Delta
  • Dynamic frequency (modal)
  • Φάσμα απόκρισης

The design modules check steel, ψυχρός χάλυβας, timber and reinforced concrete members, reinforced concrete plates and steel connections to US, ευρωπαϊκός, Αυστραλός, Νέα Ζηλανδία, καναδικός, Ηνωμένο Βασίλειο, Indian and other design standards, depending on the module.

Launching Structural 3D

There is nothing to download or install: Structural 3D runs entirely in your web browser, and your models are saved to your SkyCiv cloud storage. To launch it, Σύνδεση to your SkyCiv account and open Structural 3D from your dashboard. From there you can start a new model or open one you have already saved.

The interface is split into three stages, shown as Μοντέλο, Επίλυση και Σχέδιο στην επάνω δεξιά γωνία. You work through them in that order, and you can go back to the model at any time to make changes.

  • Μοντέλο: the buttons on the left build the structure (Κόμβοι, Μέλη, Πλάκες, Στηρίξεις, Υλικά, Διατομές) and load it (Σημειακά φορτία, Στιγμές, Κατανεμημένα φορτία, Φορτία περιοχής, Πιέσεις, Ίδιο βάρος, Φόρτωση ομάδων & Cases και Συνδυασμοί φορτίων). Νοδικές μάζες και Φασματικά φορτία are there for dynamic analysis.
  • Επίλυση: runs the analysis and switches to the results view. Κάντε κλικ Edit Model to go back to the model.
  • Σχέδιο: opens the design modules, where you check the members of the solved model against a design code.

The top menu holds the rest of the tools: Αρχείο (Άνοιξε, save and import or export models), Επεξεργασία (operations such as Repeat, Mirror and Rotate, the datasheets, groups and template assemblies), Εργαλεία (Μοντέλο επισκευής, Γραμμές πλέγματος & Έπρεπε να είχες, Measure Tool and more), Παραγωγή (3D Απόδοση, Έκθεση ανάλυσης, CSV results and drawings) και Ρυθμίσεις (units and other model and display settings).

Structural 3D Workflow

As in most structural engineering software, the workflow is to model the structure, εφαρμόστε φορτία, solve it and review the results, then design it. The documentation follows these same steps.

Βήμα 1: Μοντέλο της δομής

Start by προσθήκη κόμβων: the points in 3D space that connect your members, πλάκες, υποστηρίζει και φορτώνει. Then join them with members and plates, and assign their sections and materials. You can also draw members directly with the pen tool, build parts of the model from template assemblies, or import a model from another program. Τελικά, add supports to restrain the structure: a model without enough supports is unstable and will not solve.

Βήμα 2: Apply Loads

Apply the loads on your structure: φορτία σημείου, στιγμές, κατανεμημένα φορτία, φορτία περιοχής, plate pressures and self weight. Each load belongs to a load group, and the load groups are combined in load combinations. Το Γεννήτρια συνδυασμού φόρτωσης creates the combinations for you from a design code, so you don’t need to enter the load factors by hand. Ανεμος, snow and seismic loads can be calculated with the integrated load generator.

Βήμα 3: Solve and Review the Results

Κάντε κλικ Επίλυση to run a linear static analysis, or open the Επίλυση menu to pick another analysis type (λυγισμός, P-Delta, dynamic frequency or response spectrum). If the model doesn’t solve, ο λίστα σφαλμάτων explains the common causes, και το Μοντέλο επισκευής tool finds and fixes many of them, such as duplicate members or nodes that are very close together.

Μόλις λυθεί, review reactions, μετατοπίσεις, member forces (κουρεύω, στιγμή κάμψης, αξονική και στρέψη), stresses and plate results on the model, or look at a single member in detail. You can then generate an analysis report, export the results to CSV, or create drawings.

Βήμα 4: Σχέδιο

Ανοίξτε το Σχέδιο menu and click Έναρξη νέου κώδικα to choose a design module:

  • Μέλος χάλυβα: Μέσω πλακών μεταφοράς ροπής μεταξύ των μελών μέσω της χρήσης μιας άκαμπτης πλάκας που είτε είναι βιδωμένη είτε συγκολλημένη στα μέλη 360, Ευρωκώδικας 3, ΟΠΩΣ ΚΑΙ 4100, CSA S16, BS 5950, NZS 3404 που κάναμε παραπάνω φαίνεται στον λεπτομερή υπολογισμό του φορτίου ανέμου του 800
  • Κρυοσχηματισμένο μέλος χάλυβα: AISI S100, AS / NZS 4600 και τον Ευρωκώδικα (ΣΕ 1993-1-3)
  • Μέλος Ξυλείας: NDS 2018 και ως 1720
  • Reinforced Concrete Member: συμπεριλαμβανομένου του ACI 318, ΟΠΩΣ ΚΑΙ 3600, CSA A23.3, Ευρωκώδικας 2 και NZS 3101
  • Reinforced Concrete Plate: ACI 318, Ευρωκώδικας 2 και ως 3600
  • Σχεδιασμός σύνδεσης χάλυβα: AISC 360 και τον Ευρωκώδικα (ΣΕ 1993-1-8)

Each module checks the members of your model against the load combinations of the analysis and produces a design report. Το Σχεδιαστής ενότητας (Ισχυρό μη γραμμικό Οπλισμένο Σκυρόδεμα) in the same menu designs a single cross-section.

Ξεκίνα

Θέλετε να το δοκιμάσετε μόνοι σας?

Δοκιμάστε το SkyCiv σήμερα δωρεάν!

Εγγραφείτε Δωρεάν

Getting Help

We’ve built Structural 3D to be easy to pick up, but learning new software takes some time, so help is available along the way:

  • Tooltips: hover over the info icons next to inputs for a short explanation of what they do.
  • Βοηθός AI: ο Βοηθός AI in the bottom right corner can build or modify your model, query results, diagnose a model that won’t solve, και απαντήστε σε ερωτήσεις σχετικά με τη χρήση του SkyCiv.
  • Example videos: ⠯ Zovirax Cream Online Χωρίς συνταγή SkyCiv examples to see how engineers model, analyze and design real structures step by step, and follow along with your own model.
  • Υποστήριξη πελατών: Professional users can chat live with a SkyCiv engineer from within the software. You can also email us at [email protected] and one of our engineers will be happy to help.

Εκπαιδευτικά βίντεο

Νέος στο Λογισμικό Δομικής Ανάλυσης? Explainer Video on the Basics of Structural Analysis Software

Πώς μπορούμε να βοηθήσουμε?

×

Μεταβείτε στην κορυφή