SkyCiv-documentatie

Uw gids voor SkyCiv-software - tutorials, handleidingen en technische artikelen

Inleiding tot SkyCiv Structurele 3D

SkyCiv Structural 3D (S3D) is cloud-based structural analysis and design software for modelling, analyzing and designing 3D structures in your web browser. This page gives an overview of what Structural 3D can do, how to launch it, and the typical workflow from building a model to designing its members.

What Is SkyCiv Structural 3D?

SkyCiv Structural 3D is a full finite element analysis (LELIJK) program for frames, vakwerken, plates and shells, built around an interface that is quick to learn. You can model a structure with members, platen en kabels, apply loads and load combinations, solve it, review the results, and then design it to the code of your region, allemaal op één plek.

It can run the following analysis types:

  • Linear static
  • Linear static with buckling
  • Non-linear static with P-Delta
  • Dynamic frequency (modal)
  • Reactiespectrum

The design modules check steel, koudgevormd staal, timber and reinforced concrete members, reinforced concrete plates and steel connections to US, Europese, Australisch, Hier is een voorbeeld van de software die de SLS- en ULS-windsnelheden berekent voor:, Canadees, UK, Indian and other design standards, depending on the module.

Launching Structural 3D

There is nothing to download or install: Structural 3D runs entirely in your web browser, and your models are saved to your SkyCiv cloud storage. To launch it, Log in to your SkyCiv account and open Structural 3D from your dashboard. From there you can start a new model or open one you have already saved.

The interface is split into three stages, shown as Model, Oplossen en Ontwerp in de rechterbovenhoek. You work through them in that order, and you can go back to the model at any time to make changes.

  • Model: the buttons on the left build the structure (Knooppunten, Staven, Borden, Opleggingen, Materialen, Secties ) and load it (Puntlasten, Momenten, Gedistribueerde belastingen, Gebiedsbelasting, drukken, Eigen gewicht, Laadgroepen & Gevallen en Belastingcombinaties). nodale massa's en Spectrale belastingen are there for dynamic analysis.
  • Oplossen: runs the analysis and switches to the results view. Klik Edit Model to go back to the model.
  • Ontwerp: opens the design modules, where you check the members of the solved model against a design code.

The top menu holds the rest of the tools: het dossier (Open, save and import or export models), Bewerken (operations such as Repeat, Mirror and Rotate, the datasheets, groups and template assemblies), Gereedschap (Reparatie model, Rasterlijnen & hoogtes, Measure Tool and more), Uitvoer (3D Renderer, Analyse rapport, CSV results and drawings) en Instellingen (units and other model and display settings).

Structural 3D Workflow

As in most structural engineering software, the workflow is to model the structure, belastingen toepassen, solve it and review the results, then design it. The documentation follows these same steps.

Stap 1: Modelleer de structuur

Start by knooppunten toevoegen: the points in 3D space that connect your members, borden, ondersteunt en lasten. Then join them with members and plates, and assign their sections and materials. You can also draw members directly with the pen tool, build parts of the model from template assemblies, or import a model from another program. Uiteindelijk, add supports to restrain the structure: a model without enough supports is unstable and will not solve.

Stap 2: Apply Loads

Apply the loads on your structure: puntbelastingen, momenten aan, verdeelde ladingen, oppervlaktebelastingen, plate pressures and self weight. Each load belongs to a load group, and the load groups are combined in load combinations.  De  Laadcombinatie -generator creates the combinations for you from a design code, so you don’t need to enter the load factors by hand. Wind, snow and seismic loads can be calculated with the integrated load generator.

Stap 3: Solve and Review the Results

Klik Oplossen to run a linear static analysis, or open the Oplossen menu to pick another analysis type (knikken, P-Delta, dynamic frequency or response spectrum). If the model doesn’t solve, de lijst met fouten explains the common causes, als de Reparatie model tool finds and fixes many of them, such as duplicate members or nodes that are very close together.

eenmaal opgelost, review reactions, verplaatsingen, member forces (schuintrekken, buigmoment, axiaal en torsie), stresses and plate results on the model, or look at a single member in detail. You can then generate an analysis report, export the results to CSV, or create drawings.

Stap 4: Ontwerp

Open de Ontwerp menu and click Nieuwe code starten to choose a design module:

  • Stalen voetplaat ontwerp Eurocode: inclusief AISC 360, Eurocode 3, ALS 4100, CSA S16, BS 5950, NZS 3404 Generator Wind- en sneeuwbelastingcalculator geïntegreerd in SkyCiv S3D SkyCiv API Wind- en sneeuwbelastinggenerator De wind- en sneeuwbelastingberekening ondersteunt momenteel de volgende referentiecodes 800
  • Koudgevormd stalen lid: AISI S100, AS / NZS 4600 en Eurocode (IN 1993-1-3)
  • Houten lid: NDS 2018 en AS 1720
  • Reinforced Concrete Member: volledige ACI 318, ALS 3600, CSA A23.3, Eurocode 2 en NZS 3101
  • Reinforced Concrete Plate: ACI 318, Eurocode 2 en AS 3600
  • Steel Connection Design: AISC 360 en Eurocode (IN 1993-1-8)

Each module checks the members of your model against the load combinations of the analysis and produces a design report.  De  Sectie Designer (GSD) in the same menu designs a single cross-section.

Begin

Wil het zelf proberen?

Probeer SkyCiv vandaag gratis!

Meld u gratis aan

Getting Help

We’ve built Structural 3D to be easy to pick up, but learning new software takes some time, so help is available along the way:

  • Tooltips: hover over the info icons next to inputs for a short explanation of what they do.
  • AI-assistent: de AI-assistent in the bottom right corner can build or modify your model, query results, diagnose a model that won’t solve, en beantwoord vragen over het gebruik van SkyCiv.
  • Example videos: watch SkyCiv examples to see how engineers model, analyze and design real structures step by step, and follow along with your own model.
  • Aanbevolen veiligheidsfactor voor lagers:: Professional users can chat live with a SkyCiv engineer from within the software. You can also email us at [email protected] and one of our engineers will be happy to help.

Video-tutorials

Nieuw bij software voor structurele analyse? Explainer Video on the Basics of Structural Analysis Software

Hoe kunnen we u helpen?

×

Ga naar boven