Seleccionar / View Commands
El Seleccionar / Ver group controls how you select geometry and manage drawing visibility. These commands are in the bottom center toolbar under the selecting / ver Bóveda.
Selection commands can be combined with modifiers (por ejemplo Ctrl multi-pick or Cambiar drag-frame) for faster workflows.
Selection Group
El Selection Mode category contains tools for point-pick, rectángulo, lasso, connected-object, and duplicate-object selection. Use the dropdown arrow to switch between modes.
Selección única
Click-to-select mode with multi-pick and quick frame modifiers
Selección única is the default selection mode for normal editing and command workflows.
[__INSERT_IMAGE__]
Step-by-step
- 1Haz clic Selección única in the Selection dropdown.
- 2Click any object to select it.
- 3Sostener Ctrl (o Cmd en Mac) and click to add to the selection.
- 4Sostener Cambiar and drag to frame-select without switching modes.
Consejo: Single Pick is automatically active whenever no drawing or editing tool is running – use it as your home mode between commands.
Selección de marco
Use a rectangular selection window to select objects
Drag a rectangular window to select multiple objects at once. Dragging left-to-right selects only fully enclosed objects; dragging right-to-left (crossing) also selects any object the frame touches.
[__INSERT_IMAGE__]
Step-by-step
- 1Activar Selección de marco.
- 2Click to set the first corner of the selection rectangle.
- 3Drag to the opposite corner and release to complete.
Consejo: Left-to-right drag = enclosed objects only. Right-to-left drag = any object crossing the frame boundary. Sostener Cambiar and drag in Single Pick mode for a quick frame without switching modes.
Selección de lazo
Draw a freeform boundary to select objects in irregular areas
Selección de lazo lets you draw a freeform polygon boundary around objects. Useful when objects are densely packed and a rectangle would capture unwanted geometry.
[__INSERT_IMAGE__]
Step-by-step
- 1Activar Selección de lazo.
- 2Click and drag to trace a freeform boundary on the canvas.
- 3Release to complete; all objects inside or crossing the boundary are selected.
Consejo: Sostener Ctrl o Cmd as you finish the lasso to add to the current selection rather than replacing it.
Joint Selection
Select all connected geometry in one click
Joint Selection automatically selects an entire network of connected geometry in one click. Objects are considered connected when they share endpoints or intersections.
[__INSERT_IMAGE__]
Step-by-step
- 1Activar Joint Selection.
- 2Click any object in the connected group.
- 3All connected objects are selected automatically.
Consejo: Usar Dividir en las intersecciones first if objects overlap at crossing points but do not share vertices – Joint Selection only follows shared endpoints.
Seleccionar duplicados
Find and highlight all duplicate or overlapping geometry
Seleccionar duplicados scans the drawing and selects all geometry that is exactly duplicated or overlapping in the same position. Use this to clean up drawings before export or analysis.
[__INSERT_IMAGE__]
Step-by-step
- 1Haz clic Seleccionar duplicados.
- 2CAD scans and highlights all duplicate or overlapping objects.
- 3Review the selection, entonces presione Eliminar to remove duplicates.
Consejo: Run this command before exporting to DXF or performing structural analysis – duplicate geometry can cause unexpected results in downstream tools.
Zoom a extensiones
Fit all visible objects into the viewport
Zoom a extensiones reframes the canvas view to fit all currently visible geometry within the viewport. Useful after importing files or after panning far from the drawing.
[__INSERT_IMAGE__]
Step-by-step
- 1Haz clic Zoom a extensiones in the toolbar.
- 2The view automatically reframes to include all visible geometry.
Consejo: Use this immediately after importing a DXF or JSON file to verify all imported geometry is visible and positioned as expected.
Active View State Group
El Active View State category controls visibility of selected or hidden items so you can focus on specific parts of the drawing.
Mostrar todo
Restore visibility of all hidden objects
Mostrar todo restores the full drawing view by making all hidden objects visible again. Use it to exit Isolate Selection mode or to reveal any objects hidden with Hide Selected.
[__INSERT_IMAGE__]
Step-by-step
- 1Abre el Active View State desplegable.
- 2Haz clic Mostrar todo.
- 3All hidden objects are restored to full visibility.
Consejo: Show All is the single command to exit both Isolate mode and any individual hidden-object states in one step.
Hide Selected
Temporarily remove selected objects from view without deleting them
Hide Selected hides the selected objects without deleting them. Hidden objects remain in the drawing, are included in exports, and can be restored at any time with Mostrar todo.
[__INSERT_IMAGE__]
Step-by-step
- 1Select one or more objects to hide.
- 2Haz clic Hide Selected in the Active View State dropdown.
- 3Selected objects disappear from view.
Consejo: Hidden objects are still included in DXF/JSON exports. Use this to reduce visual clutter while editing without losing any data.
Isolate Selection
Show only selected objects and hide everything else
Isolate Selection hides everything except the currently selected objects, letting you work in a focused context without visual distractions. Usar Mostrar todo to restore the full view.
[__INSERT_IMAGE__]
Step-by-step
- 1Select the objects you want to focus on.
- 2Haz clic Isolate Selection in the Active View State dropdown.
- 3All non-selected objects are hidden.
- 4Usar Mostrar todo when finished to restore full visibility.
Consejo: A fast way to inspect or edit specific geometry in complex drawings. Combine with Joint Selection to isolate an entire connected structure.
