Documentação SkyCiv

Seu guia para o software SkyCiv - tutoriais, guias de instruções e artigos técnicos

Fundação SkyCiv

  1. Casa
  2. Fundação SkyCiv
  3. Rodapés Isolados
  4. Verificação
  5. CSA A23.3-14 Verificação # 1

CSA A23.3-14 Verificação # 1

 

manual_csa

As informações apresentadas nesta página destinam-se a demonstrar a convergência do projeto de seção das provisões CSA A23.3 para fundações isoladas que podem ser alcançadas com o SkyCiv. Todos os exemplos são referenciados nos seguintes livros:

Livro 1: Svetlana Brzev e John Pao. Projeto de concreto armado: Uma Abordagem Prática, 2009.

Exemplo # 1 Design of Axially Loaded Isolated Footing

referência: Livro 1, p.605.

DESCRIÇÃO
A typical cross-section of a square-shaped spread footing supporting a 500 mm square concrete interior column is shown in the figure below. The column carries a specified dead load of 1000 kN and a specified live load of 1000 kN. The allowable soil bearing pressure is 250 kPa .

GEOMETRIA E PROPRIEDADES DOS MATERIAIS

Figura 2: Footing model and material properties of example #1

CARREGANDO

Dois casos de cargas estáticas são considerados:

\( \texto{D} = 1000 \texto{ kN} \)
\( \texto{eu} = 1000 \texto{ kN} \)

The results of service and factor load combination are in computed in reference of NBCC 2010.

ANÁLISE

A análise é feita usando o método convencional rígido. See the Isolated Footing User Manual for more explanation on using SkyCiv Foundation.

COMPARAÇÃO DE RESULTADOS

Os resultados mais significativos são comparados na tabela abaixo:

Resultados
Parâmetro Book Reference SkyCiv
Cargas
SLS 2000 2141.01
ULS 2750 2926.26
Pressão do Solo
qf 305 325.14
One way shear
Actual Shear 640 725.47
One Way Shear Capacity 730 753.7
Two way shear
bo 4.1 4.2
Punching shear force 2750 2567.8
Two Way Shear Capacity 2734.29 2852.8
Flexure
Actual Moment 715 762.05
Capacidade de Momento 715 797.66

Notas: Discrepancies on some values are due to the following:

*Actual self weight of column and footing are considered in SkyCiv. Além disso, SkyCiv requires a column height greater than zero.

*SkyCiv calculates actual measurement of the effective depth for both directions.

 

 

SkyCiv Foundation module offers an innovative and user-friendly interface for the design and analysis of an isolated footing in accordance with CSA A23.3-14.

Quer experimentar o software de design de base da SkyCiv? Nossa ferramenta gratuita permite que os usuários realizem cálculos de transporte de carga sem qualquer download ou instalação!

Este artigo foi útil para você?
sim Não

Como podemos ajudar?

Vá para o topo