Auswahl / View Commands
Mit der Auswahl / Aussicht group controls how you select geometry and manage drawing visibility. These commands are in the bottom center toolbar under the selecting / Ansicht Überschrift.
Selection commands can be combined with modifiers (beispielsweise dem Strg multi-pick or Wechsel drag-frame) for faster workflows.
Selection Group
Mit der Selection Mode category contains tools for point-pick, Rechteck, lasso, connected-object, and duplicate-object selection. Use the dropdown arrow to switch between modes.
Einzelauswahl
Click-to-select mode with multi-pick and quick frame modifiers
Einzelauswahl is the default selection mode for normal editing and command workflows.
[__INSERT_IMAGE__]
Schritt für Schritt
- 1Klicken Einzelauswahl in the Selection dropdown.
- 2Click any object to select it.
- 3Halt Strg (oder Cmd auf dem Mac) and click to add to the selection.
- 4Halt Wechsel and drag to frame-select without switching modes.
Trinkgeld: Single Pick is automatically active whenever no drawing or editing tool is running – use it as your home mode between commands.
Rahmenauswahl
Use a rectangular selection window to select objects
Drag a rectangular window to select multiple objects at once. Dragging left-to-right selects only fully enclosed objects; dragging right-to-left (crossing) also selects any object the frame touches.
[__INSERT_IMAGE__]
Schritt für Schritt
- 1aktivieren Sie Rahmenauswahl.
- 2Click to set the first corner of the selection rectangle.
- 3Drag to the opposite corner and release to complete.
Trinkgeld: Left-to-right drag = enclosed objects only. Right-to-left drag = any object crossing the frame boundary. Halt Wechsel and drag in Single Pick mode for a quick frame without switching modes.
Lasso-Auswahl
Draw a freeform boundary to select objects in irregular areas
Lasso-Auswahl lets you draw a freeform polygon boundary around objects. Useful when objects are densely packed and a rectangle would capture unwanted geometry.
[__INSERT_IMAGE__]
Schritt für Schritt
- 1aktivieren Sie Lasso-Auswahl.
- 2Click and drag to trace a freeform boundary on the canvas.
- 3Release to complete; all objects inside or crossing the boundary are selected.
Trinkgeld: Halt Strg oder Cmd as you finish the lasso to add to the current selection rather than replacing it.
Joint Selection
Select all connected geometry in one click
Joint Selection automatically selects an entire network of connected geometry in one click. Objects are considered connected when they share endpoints or intersections.
[__INSERT_IMAGE__]
Schritt für Schritt
- 1aktivieren Sie Joint Selection.
- 2Click any object in the connected group.
- 3All connected objects are selected automatically.
Trinkgeld: Benutzen An Kreuzungen teilen first if objects overlap at crossing points but do not share vertices – Joint Selection only follows shared endpoints.
Wählen Sie Duplikate aus
Find and highlight all duplicate or overlapping geometry
Wählen Sie Duplikate aus scans the drawing and selects all geometry that is exactly duplicated or overlapping in the same position. Use this to clean up drawings before export or analysis.
[__INSERT_IMAGE__]
Schritt für Schritt
- 1Klicken Wählen Sie Duplikate aus.
- 2CAD scans and highlights all duplicate or overlapping objects.
- 3Review the selection, Schauen wir sie uns im Modell an Löschen to remove duplicates.
Trinkgeld: Run this command before exporting to DXF or performing structural analysis – duplicate geometry can cause unexpected results in downstream tools.
Auf Grenzen zoomen
Fit all visible objects into the viewport
Auf Grenzen zoomen reframes the canvas view to fit all currently visible geometry within the viewport. Useful after importing files or after panning far from the drawing.
[__INSERT_IMAGE__]
Schritt für Schritt
- 1Klicken Auf Grenzen zoomen in der Symbolleiste.
- 2The view automatically reframes to include all visible geometry.
Trinkgeld: Use this immediately after importing a DXF or JSON file to verify all imported geometry is visible and positioned as expected.
Active View State Group
Mit der Active View State category controls visibility of selected or hidden items so you can focus on specific parts of the drawing.
Zeige alles
Restore visibility of all hidden objects
Zeige alles restores the full drawing view by making all hidden objects visible again. Use it to exit Isolate Selection mode or to reveal any objects hidden with Hide Selected.
[__INSERT_IMAGE__]
Schritt für Schritt
- 1Öffnen Sie die Active View State Dropdown-Liste.
- 2Klicken Zeige alles.
- 3All hidden objects are restored to full visibility.
Trinkgeld: Show All is the single command to exit both Isolate mode and any individual hidden-object states in one step.
Hide Selected
Temporarily remove selected objects from view without deleting them
Hide Selected hides the selected objects without deleting them. Hidden objects remain in the drawing, are included in exports, and can be restored at any time with Zeige alles.
[__INSERT_IMAGE__]
Schritt für Schritt
- 1Select one or more objects to hide.
- 2Klicken Hide Selected in the Active View State dropdown.
- 3Selected objects disappear from view.
Trinkgeld: Hidden objects are still included in DXF/JSON exports. Use this to reduce visual clutter while editing without losing any data.
Isolate Selection
Show only selected objects and hide everything else
Isolate Selection hides everything except the currently selected objects, letting you work in a focused context without visual distractions. Benutzen Zeige alles to restore the full view.
[__INSERT_IMAGE__]
Schritt für Schritt
- 1Select the objects you want to focus on.
- 2Klicken Isolate Selection in the Active View State dropdown.
- 3All non-selected objects are hidden.
- 4Benutzen Zeige alles when finished to restore full visibility.
Trinkgeld: A fast way to inspect or edit specific geometry in complex drawings. Combine with Joint Selection to isolate an entire connected structure.
