выбирающий / View Commands
В выбирающий / Посмотреть group controls how you select geometry and manage drawing visibility. These commands are in the bottom center toolbar under the selecting / Посмотреть заголовок.
Selection commands can be combined with modifiers (Например Ctrl multi-pick or Сдвиг drag-frame) for faster workflows.
Selection Group
В Selection Mode category contains tools for point-pick, прямоугольник, lasso, connected-object, and duplicate-object selection. Use the dropdown arrow to switch between modes.
Одиночный выбор
Click-to-select mode with multi-pick and quick frame modifiers
Одиночный выбор is the default selection mode for normal editing and command workflows.
[__INSERT_IMAGE__]
Шаг за шагом
- 1Нажмите Одиночный выбор in the Selection dropdown.
- 2Click any object to select it.
- 3Держать Ctrl (или Cmd на Mac) and click to add to the selection.
- 4Держать Сдвиг and drag to frame-select without switching modes.
Поскольку мы хотим, чтобы другая сторона конструкции начиналась в этом месте: Single Pick is automatically active whenever no drawing or editing tool is running – use it as your home mode between commands.
Выбор кадра
Use a rectangular selection window to select objects
Drag a rectangular window to select multiple objects at once. Dragging left-to-right selects only fully enclosed objects; dragging right-to-left (crossing) also selects any object the frame touches.
[__INSERT_IMAGE__]
Шаг за шагом
- 1Активировать Выбор кадра.
- 2Click to set the first corner of the selection rectangle.
- 3Drag to the opposite corner and release to complete.
Поскольку мы хотим, чтобы другая сторона конструкции начиналась в этом месте: Left-to-right drag = enclosed objects only. Right-to-left drag = any object crossing the frame boundary. Держать Сдвиг and drag in Single Pick mode for a quick frame without switching modes.
Выбор Лассо
Draw a freeform boundary to select objects in irregular areas
Выбор Лассо lets you draw a freeform polygon boundary around objects. Useful when objects are densely packed and a rectangle would capture unwanted geometry.
[__INSERT_IMAGE__]
Шаг за шагом
- 1Активировать Выбор Лассо.
- 2Click and drag to trace a freeform boundary on the canvas.
- 3Release to complete; all objects inside or crossing the boundary are selected.
Поскольку мы хотим, чтобы другая сторона конструкции начиналась в этом месте: Держать Ctrl или Cmd as you finish the lasso to add to the current selection rather than replacing it.
Joint Selection
Select all connected geometry in one click
Joint Selection automatically selects an entire network of connected geometry in one click. Objects are considered connected when they share endpoints or intersections.
[__INSERT_IMAGE__]
Шаг за шагом
- 1Активировать Joint Selection.
- 2Click any object in the connected group.
- 3All connected objects are selected automatically.
Поскольку мы хотим, чтобы другая сторона конструкции начиналась в этом месте: Использовать Разделение на перекрестках first if objects overlap at crossing points but do not share vertices – Joint Selection only follows shared endpoints.
Выберите дубликаты
Find and highlight all duplicate or overlapping geometry
Выберите дубликаты scans the drawing and selects all geometry that is exactly duplicated or overlapping in the same position. Use this to clean up drawings before export or analysis.
[__INSERT_IMAGE__]
Шаг за шагом
- 1Нажмите Выберите дубликаты.
- 2CAD scans and highlights all duplicate or overlapping objects.
- 3Review the selection, затем нажмите Удалить to remove duplicates.
Поскольку мы хотим, чтобы другая сторона конструкции начиналась в этом месте: Run this command before exporting to DXF or performing structural analysis – duplicate geometry can cause unexpected results in downstream tools.
Увеличить масштаб
Fit all visible objects into the viewport
Увеличить масштаб reframes the canvas view to fit all currently visible geometry within the viewport. Useful after importing files or after panning far from the drawing.
[__INSERT_IMAGE__]
Шаг за шагом
- 1Нажмите Увеличить масштаб на панели инструментов.
- 2The view automatically reframes to include all visible geometry.
Поскольку мы хотим, чтобы другая сторона конструкции начиналась в этом месте: Use this immediately after importing a DXF or JSON file to verify all imported geometry is visible and positioned as expected.
Active View State Group
В Active View State category controls visibility of selected or hidden items so you can focus on specific parts of the drawing.
Показать все
Restore visibility of all hidden objects
Показать все restores the full drawing view by making all hidden objects visible again. Use it to exit Isolate Selection mode or to reveal any objects hidden with Hide Selected.
[__INSERT_IMAGE__]
Шаг за шагом
- 1Откройте Active View State падать.
- 2Нажмите Показать все.
- 3All hidden objects are restored to full visibility.
Поскольку мы хотим, чтобы другая сторона конструкции начиналась в этом месте: Show All is the single command to exit both Isolate mode and any individual hidden-object states in one step.
Hide Selected
Temporarily remove selected objects from view without deleting them
Hide Selected hides the selected objects without deleting them. Hidden objects remain in the drawing, are included in exports, and can be restored at any time with Показать все.
[__INSERT_IMAGE__]
Шаг за шагом
- 1Select one or more objects to hide.
- 2Нажмите Hide Selected in the Active View State dropdown.
- 3Selected objects disappear from view.
Поскольку мы хотим, чтобы другая сторона конструкции начиналась в этом месте: Hidden objects are still included in DXF/JSON exports. Use this to reduce visual clutter while editing without losing any data.
Isolate Selection
Show only selected objects and hide everything else
Isolate Selection hides everything except the currently selected objects, letting you work in a focused context without visual distractions. Использовать Показать все to restore the full view.
[__INSERT_IMAGE__]
Шаг за шагом
- 1Select the objects you want to focus on.
- 2Нажмите Isolate Selection in the Active View State dropdown.
- 3All non-selected objects are hidden.
- 4Использовать Показать все when finished to restore full visibility.
Поскольку мы хотим, чтобы другая сторона конструкции начиналась в этом месте: A fast way to inspect or edit specific geometry in complex drawings. Combine with Joint Selection to isolate an entire connected structure.
