Selecteren / View Commands
De Selecteren / Bekijk group controls how you select geometry and manage drawing visibility. These commands are in the bottom center toolbar under the selecting / weergave rubriek.
Selection commands can be combined with modifiers (bijvoorbeeld Ctrl multi-pick or Verschuiving drag-frame) for faster workflows.
Selection Group
De Selection Mode category contains tools for point-pick, rechthoek, lasso, connected-object, and duplicate-object selection. Use the dropdown arrow to switch between modes.
Enkele keuze
Click-to-select mode with multi-pick and quick frame modifiers
Enkele keuze is the default selection mode for normal editing and command workflows.
[__INSERT_IMAGE__]
Stap voor stap
- 1Klik Enkele keuze in the Selection dropdown.
- 2Click any object to select it.
- 3Houden Ctrl (of Cmd op Mac) and click to add to the selection.
- 4Houden Verschuiving and drag to frame-select without switching modes.
De volgende pop-up wordt dan weergegeven met de twee volgende vereiste invoer:: Single Pick is automatically active whenever no drawing or editing tool is running – use it as your home mode between commands.
Kaderselectie
Use a rectangular selection window to select objects
Drag a rectangular window to select multiple objects at once. Dragging left-to-right selects only fully enclosed objects; dragging right-to-left (crossing) also selects any object the frame touches.
[__INSERT_IMAGE__]
Stap voor stap
- 1Activeren Kaderselectie.
- 2Click to set the first corner of the selection rectangle.
- 3Drag to the opposite corner and release to complete.
De volgende pop-up wordt dan weergegeven met de twee volgende vereiste invoer:: Left-to-right drag = enclosed objects only. Right-to-left drag = any object crossing the frame boundary. Houden Verschuiving and drag in Single Pick mode for a quick frame without switching modes.
Lasso-selectie
Draw a freeform boundary to select objects in irregular areas
Lasso-selectie lets you draw a freeform polygon boundary around objects. Useful when objects are densely packed and a rectangle would capture unwanted geometry.
[__INSERT_IMAGE__]
Stap voor stap
- 1Activeren Lasso-selectie.
- 2Click and drag to trace a freeform boundary on the canvas.
- 3Release to complete; all objects inside or crossing the boundary are selected.
De volgende pop-up wordt dan weergegeven met de twee volgende vereiste invoer:: Houden Ctrl of Cmd as you finish the lasso to add to the current selection rather than replacing it.
Joint Selection
Select all connected geometry in one click
Joint Selection automatically selects an entire network of connected geometry in one click. Objects are considered connected when they share endpoints or intersections.
[__INSERT_IMAGE__]
Stap voor stap
- 1Activeren Joint Selection.
- 2Click any object in the connected group.
- 3All connected objects are selected automatically.
De volgende pop-up wordt dan weergegeven met de twee volgende vereiste invoer:: Gebruik Splitsen op kruispunten first if objects overlap at crossing points but do not share vertices – Joint Selection only follows shared endpoints.
Selecteer Duplicaten
Find and highlight all duplicate or overlapping geometry
Selecteer Duplicaten scans the drawing and selects all geometry that is exactly duplicated or overlapping in the same position. Use this to clean up drawings before export or analysis.
[__INSERT_IMAGE__]
Stap voor stap
- 1Klik Selecteer Duplicaten.
- 2CAD scans and highlights all duplicate or overlapping objects.
- 3Review the selection, druk vervolgens op Verwijderen to remove duplicates.
De volgende pop-up wordt dan weergegeven met de twee volgende vereiste invoer:: Run this command before exporting to DXF or performing structural analysis – duplicate geometry can cause unexpected results in downstream tools.
Zoom naar omvang
Fit all visible objects into the viewport
Zoom naar omvang reframes the canvas view to fit all currently visible geometry within the viewport. Useful after importing files or after panning far from the drawing.
[__INSERT_IMAGE__]
Stap voor stap
- 1Klik Zoom naar omvang in de werkbalk.
- 2The view automatically reframes to include all visible geometry.
De volgende pop-up wordt dan weergegeven met de twee volgende vereiste invoer:: Use this immediately after importing a DXF or JSON file to verify all imported geometry is visible and positioned as expected.
Active View State Group
De Active View State category controls visibility of selected or hidden items so you can focus on specific parts of the drawing.
Toon alles
Restore visibility of all hidden objects
Toon alles restores the full drawing view by making all hidden objects visible again. Use it to exit Isolate Selection mode or to reveal any objects hidden with Hide Selected.
[__INSERT_IMAGE__]
Stap voor stap
- 1Open de Active View State laten vallen.
- 2Klik Toon alles.
- 3All hidden objects are restored to full visibility.
De volgende pop-up wordt dan weergegeven met de twee volgende vereiste invoer:: Show All is the single command to exit both Isolate mode and any individual hidden-object states in one step.
Hide Selected
Temporarily remove selected objects from view without deleting them
Hide Selected hides the selected objects without deleting them. Hidden objects remain in the drawing, are included in exports, and can be restored at any time with Toon alles.
[__INSERT_IMAGE__]
Stap voor stap
- 1Select one or more objects to hide.
- 2Klik Hide Selected in the Active View State dropdown.
- 3Selected objects disappear from view.
De volgende pop-up wordt dan weergegeven met de twee volgende vereiste invoer:: Hidden objects are still included in DXF/JSON exports. Use this to reduce visual clutter while editing without losing any data.
Isolate Selection
Show only selected objects and hide everything else
Isolate Selection hides everything except the currently selected objects, letting you work in a focused context without visual distractions. Gebruik Toon alles to restore the full view.
[__INSERT_IMAGE__]
Stap voor stap
- 1Select the objects you want to focus on.
- 2Klik Isolate Selection in the Active View State dropdown.
- 3All non-selected objects are hidden.
- 4Gebruik Toon alles when finished to restore full visibility.
De volgende pop-up wordt dan weergegeven met de twee volgende vereiste invoer:: A fast way to inspect or edit specific geometry in complex drawings. Combine with Joint Selection to isolate an entire connected structure.
