FREE VERTICAL BRACING CONNECTION CALCULATOR
SkyCiv Vertical Bracing Connection Calculator
This vertical bracing connection calculator returns the capacities and utility ratios for a braced bay connection, working from the brace, beam and column dimensions, the gusset plate properties, the steel grades and the bolt arrangement you enter. Checks follow AISC 360-16, in ASD oder LRFD.
A vertical brace resists lateral load from wind and earthquake, and the gusset plate at each end is where that load enters the frame. Sizing the plate, the bolts and the welds is what the connection design comes down to.
Inhalt
Über den Verbindungsrechner für vertikale Verbände
The calculator works on the connection between a diagonal brace, a beam and a column, made through a gusset plate. It checks tension and compression in the brace, und scheren, tension and compression in the beam, reporting each as a capacity and a utility ratio to AISC 360-16 in ASD oder LRFD.
Results follow from what you enter: the dimensions of the bracing member, the gusset plate properties, the steel material specifications, the bolt configuration and the applied design loads.
Was ist eine vertikale Aussteifungsverbindung??
A vertical bracing connection is how a diagonal brace attaches to the frame it stabilizes. The brace resists lateral force from wind and seismic load, and the connection has to move that force into the beam and column without the joint becoming the weak point.
The attachment is usually made with a gusset plate and bolts. Getting it right is what keeps the frame rigid and limits the deformation it sees under lateral load.
What Components Make Up This Connection?
Six parts make up a vertical bracing connection:
- Spalte: the vertical member supporting the framework.
- Strahl: the horizontal member that resists bending.
- Befestigen: the diagonal member providing lateral stability.
- Knotenblech: the plate joining the brace to the beam and column.
- Schrauben: the fasteners attaching the gusset plate to the members.
- Schweißnähte: used to join members and plates where bolts are not applicable.
These work together to carry axial, shear and moment force across the joint.
Where are Vertical Bracing Connections Used?
Vertical bracing is used where a structure needs lateral stability:
- Hochhäuser.
- Industrie- und Lagergerüste.
- Brücken und Überführungen.
- Kraftwerke und Sendemasten.
- Mechanische und Offshore-Strukturen.
The calculator suits any of these, since the checks depend on the members and plate you enter rather than the building type around them.
What Alternatives Exist to Vertical Bracing?
Moment-resisting frames and shear walls both resist lateral load without a diagonal brace, and either can be the right answer depending on the project.
Vertical bracing stays the primary solution for lateral load resistance, and it is preferred where simplicity, cost and ease of installation matter.
So verwenden Sie den Rechner für vertikale Aussteifungsverbindungen
Enter the three members, the gusset plate, the fasteners and the design loads. The inputs are:
- Spalte: dimensions and material properties.
- Strahl: dimensions and material properties.
- Befestigen: dimensions and cross-sectional properties of the diagonal.
- Knotenblech: Dicke, width and material properties.
- Schrauben: Art, diameter and arrangement.
- Schweißnähte: details of the welded connections, where there are any.
- Bemessungslasten: tension and compression in the brace, plus shear, tension and compression in the beam.
Click calculate. The tool works out the utility ratios and capacities and produces a detailed report of the results to guide the design.
Why Choose SkyCiv for Bracing Connection Design?
Each check comes back as a capacity next to a utility ratio, so an undersized gusset plate or bolt group is visible at a glance, and the report shows the working behind every number rather than a single pass or fail. The tool runs in the browser, so a bay can be checked without installing anything.
The full SkyCiv Connection Design module goes further: zu Ende 80+ pre-configured connection types, detailing and clash checks before the solve, CloudCAD detail drawings, and export of the 3D connection geometry directly to IFC.
- Rechner für Trägerspleißverbindungen
- Schraubenrechner
- Schraubverbindungsdesign
- Rechner für Schraubverbindungsverbindungen
- Chevron-Klammer-Verbindungsrechner
- Rechner für Säulenspleißverbindungen
- Rechner für Doppelwinkelverbindungen
- Rechner für Endplattenverbindungen
- Rechner für Flanschplattenverbindungen
- Knieorthesen-Verbindungsrechner
- Moment Verbindung
- Rechner für Einzelwinkelverbindungen
- Rechner für Einzelplattenverbindungen
- SkyCiv-Verbindungsdesign vs. Statische Idee
- SkyCiv-Verbindungsdesign vs. Ram-Verbindung
- Schweißrechner
- Schweißverbindungsdesign
Common questions about designing and checking vertical bracing connections.
Ihre Fragen beantwortet
Intuitive Benutzeroberfläche
Unsere leicht zu erlernende, leistungsstark, und intuitive Benutzeroberfläche ermöglicht Ihnen einen schnellen Zugriff auf alle benötigten Funktionen. Vollgepackt mit intelligenten Funktionen wie dem Stiftwerkzeug, Wiederholen / Spiegeln, und Massenbearbeitung. Ihre Inhalte werden hier angezeigt
Umfassende Unterstützung für Bemessungsnormen
Unsere Software unterstützt eine breite Palette von Stahl-, Holz-, und Betonbemessungsnormen, darunter, IM, AISI, NDS, AS, und CSA.
API-Technologie
SkyCiv ist eine maßgeschneiderte Lösung mit nahtlosen Integrationen, einfache Implementierungen, automatisierte Berichte und ein skalierbares Design und eine skalierbare Architektur.
24/7 Kundensupport
SkyCiv ist eine maßgeschneiderte Lösung mit nahtlosen Integrationen, einfache Implementierungen, automatisierte Berichte und ein skalierbares Design und eine skalierbare Architektur.
