FREE COLUMN SPLICE CONNECTION CALCULATOR

Calculadora de conexión de empalme de columnas SkyCiv

This column splice connection calculator checks the bolted flange plates and web plates joining two W-shaped columns, and returns the capacity and utility ratio for strong-axis moment, tensión, compresión y corte de eje fuerte. Los controles siguen AISC 360-16, en TEA o LRFD.

Columns in multi-story frames are spliced because a single length cannot be fabricated, transported and handled in one piece. The splice has to pass load and moment from the column above into the column below as though the member were continuous.

Starting SkyCiv Column Splice Connection Calculator...

Contenido

Acerca de la calculadora de conexiones de empalme de columnas

The calculator works on splices between W-shaped columns joined by bolted flange plates and web plates. Evalúa el momento del eje fuerte., tensión, compression and strong-axis shear from the properties of the columns and plates you enter, reporting each as a capacity and a utility ratio.

Los controles siguen AISC 360-16 en TEA o LRFD, and the output includes the calculations behind the numbers rather than a bare pass or fail.

¿Qué es una conexión de empalme de columna??

A column splice joins two vertical members, usually W-shaped columns, para extender su longitud. Flange plates and web plates are bolted across the joint so the two segments behave as one member.

Splices are what let columns in high-rise construction be fabricated and transported in lengths that can actually be handled. The connection carries axial force, moment and shear, so the frame above is supported as though the column ran uninterrupted.

What Components Make Up a Column Splice?

Four parts make up the connection:

  • W-shaped columns: the vertical members supporting the structure.
  • Placas de brida: bolted to the column flanges to transfer bending moment.
  • Placas web: bolted to the column webs to resist shear.
  • Pernos: the fasteners holding the flange and web plates in place.

Together they move load and moment across the splice and keep the two column segments continuous.

Where are Column Splices Commonly Used?

Column splices appear wherever a column runs taller than one fabricated length:

  • High-rise buildings needing column extensions.
  • Estructuras industriales con entramados de varios pisos..
  • Bridge piers and other infrastructure.
  • Torres y estructuras mecánicas altas..

The calculator suits all of these, because the checks depend on the columns, plates and loads you enter rather than the structure around them.

What Are the Benefits of a Column Splice?

  • Transporte y manipulación: columns can be fabricated in shorter sections that are easier to move and lift.
  • Structural continuity: load transfers between segments, so the spliced column acts as one member.
  • Gama de acciones: El mismo detalle se puede diseñar para el momento., tensión, compresión y corte.
  • Verificaciones de código: las capacidades siguen AISC 360-16, en TEA o LRFD.

Cómo utilizar la calculadora de conexiones de empalme de columnas

Enter the columns, the plates, the bolts and the design actions at the splice. Las entradas son:

  • W-shaped column properties: dimensions and material properties of the connected columns.
  • Detalles de la placa de brida: grosor, width and material properties.
  • Detalles de la placa web: grosor, height and material properties.
  • Especificaciones de los pernos: tipo, diámetro y disposición.
  • Cargas de diseño: momento de eje fuerte, tensión, compresión y corte de eje fuerte.

Click calculate. The tool evaluates the utility ratios and capacities and generates a detailed report to keep with the design.

Why Choose SkyCiv for Column Splice Design?

Each check is reported as a capacity next to a utility ratio, so an overloaded plate or bolt group is obvious without reading the whole report, and the workings are shown rather than hidden. Se ejecuta en el navegador., so a splice can be sized without installing anything.

The full SkyCiv Connection Design module extends that: encima 80+ pre-configured connection types, detailing and clash checks run before the solve, CloudCAD detail drawings, and export of the 3D connection geometry directly to IFC.

Herramientas Relacionadas

Common questions about designing and checking column splice connections.

Tus preguntas respondidas

What does the column splice connection calculator check?

Evalúa el momento del eje fuerte., tensión, compression and strong-axis shear at the splice, returning a capacity and a utility ratio for each.

Dimensions and material properties for the two columns, the flange plate thickness, ancho y material, the web plate thickness, altura y material, el tipo de perno, diámetro y disposición, y las cargas de diseño.

AISC 360-16, ya sea en ASD o LRFD. Pick the method the project works to and the capacities and utility ratios follow it.

W-shaped columns. The detail relies on flange plates bolted to the flanges and web plates bolted to the webs, so the section needs both.

Because a column taller than one fabricated length cannot be transported or handled in one piece. Splicing lets it be made in shorter sections and joined on site.

The design action divided by the capacity for that check. En o debajo 1.0 the component passes; encima 1.0 it is overloaded and the plate, bolt group or column has to change.

Si. Momento de eje fuerte, tensión, compression and strong-axis shear are all inputs, and the calculator reports a capacity and a utility ratio for each.

Si. Alongside the utility ratios and capacities it generates a detailed report, so the calculations can go into the design file.

SkyCiv Connection Design

Su espacio de trabajo completo para el diseño de conexiones. Obtenga acceso instantáneo a 80+ cizalla preconfigurada, momento, y plantillas de conexión estructural complejas.

Obtenga acceso hoy

Interfaz intuitiva

Nuestro fácil de aprender, poderoso para usar, La interfaz intuitiva le permite acceder rápidamente a todas las funciones que necesita.. Equipado con funciones inteligentes como la herramienta Pluma, Repetir / Espejo, y edición masiva. Su contenido va aquí

Soporte integral de código de diseño

Nuestro software admite una amplia gama de acero., Madera, y códigos de diseño concretos, incluido AISC, EN, AISI, NDS, AS, y CSA.

Tecnología API

SkyCiv es una solución personalizada que ofrece integraciones perfectas, implementaciones fáciles, informes automatizados y un diseño y arquitectura escalables.

24/7 Atención al cliente

SkyCiv es una solución personalizada que ofrece integraciones perfectas, implementaciones fáciles, informes automatizados y un diseño y arquitectura escalables.

Explorar todos los productos

Confiado por 10,000+ Ingenieros en todo el mundo

Potente software de diseño y análisis estructural basado en la nube

Inicia gratis