FREE VERTICAL BRACING CONNECTION CALCULATOR

SkyCiv Vertical Bracing Connection Calculator

This vertical bracing connection calculator returns the capacities and utility ratios for a braced bay connection, working from the brace, beam and column dimensions, the gusset plate properties, the steel grades and the bolt arrangement you enter. Checks follow AISC 360-16, ASD または LRFD の場合.

A vertical brace resists lateral load from wind and earthquake, and the gusset plate at each end is where that load enters the frame. Sizing the plate, the bolts and the welds is what the connection design comes down to.

Starting SkyCiv Vertical Bracing Connection Calculator...

コンテンツ

垂直ブレース接続計算機について

The calculator works on the connection between a diagonal brace, a beam and a column, made through a gusset plate. It checks tension and compression in the brace, そして剪断します, tension and compression in the beam, reporting each as a capacity and a utility ratio to AISC 360-16 ASD または LRFD の場合.

Results follow from what you enter: the dimensions of the bracing member, the gusset plate properties, the steel material specifications, the bolt configuration and the applied design loads.

垂直ブレース接続とは?

A vertical bracing connection is how a diagonal brace attaches to the frame it stabilizes. The brace resists lateral force from wind and seismic load, and the connection has to move that force into the beam and column without the joint becoming the weak point.

The attachment is usually made with a gusset plate and bolts. Getting it right is what keeps the frame rigid and limits the deformation it sees under lateral load.

What Components Make Up This Connection?

Six parts make up a vertical bracing connection:

  • カラム: the vertical member supporting the framework.
  • ビーム: the horizontal member that resists bending.
  • ブレース: the diagonal member providing lateral stability.
  • ガセットプレート: the plate joining the brace to the beam and column.
  • ボルト: the fasteners attaching the gusset plate to the members.
  • 溶接: used to join members and plates where bolts are not applicable.

These work together to carry axial, shear and moment force across the joint.

Where are Vertical Bracing Connections Used?

Vertical bracing is used where a structure needs lateral stability:

  • 高層ビル.
  • 産業および倉庫のフレームワーク.
  • 橋と陸橋.
  • 発電所と送電鉄塔.
  • 機械および海洋構造物.

The calculator suits any of these, since the checks depend on the members and plate you enter rather than the building type around them.

What Alternatives Exist to Vertical Bracing?

Moment-resisting frames and shear walls both resist lateral load without a diagonal brace, and either can be the right answer depending on the project.

Vertical bracing stays the primary solution for lateral load resistance, and it is preferred where simplicity, cost and ease of installation matter.

垂直ブレース接続計算ツールの使用方法

Enter the three members, the gusset plate, the fasteners and the design loads. The inputs are:

  • カラム: dimensions and material properties.
  • ビーム: dimensions and material properties.
  • ブレース: dimensions and cross-sectional properties of the diagonal.
  • ガセットプレート: 厚さ, width and material properties.
  • ボルト: タイプ, diameter and arrangement.
  • 溶接: details of the welded connections, where there are any.
  • 設計負荷: tension and compression in the brace, plus shear, tension and compression in the beam.

Click calculate. The tool works out the utility ratios and capacities and produces a detailed report of the results to guide the design.

Why Choose SkyCiv for Bracing Connection Design?

Each check comes back as a capacity next to a utility ratio, so an undersized gusset plate or bolt group is visible at a glance, and the report shows the working behind every number rather than a single pass or fail. The tool runs in the browser, so a bay can be checked without installing anything.

The full SkyCiv Connection Design module goes further: 以上 80+ pre-configured connection types, detailing and clash checks before the solve, CloudCAD detail drawings, and export of the 3D connection geometry directly to IFC.

関連ツール

Common questions about designing and checking vertical bracing connections.

あなたの質問が解決されました

What does the vertical bracing connection calculator check?

It checks tension and compression in the brace, そして剪断します, tension and compression in the beam, returning a capacity and a utility ratio for each.

Dimensions and material properties for the column, beam and brace, the gusset plate thickness, width and material, the bolt type, diameter and arrangement, any weld details, そしてデザインロード.

AISC 360-16, ASD または LRFD のいずれかで. Pick the method the project works to and the capacities and utility ratios follow it.

It is the plate that joins the diagonal brace to the beam and column. Brace force passes through it into the frame, so its thickness, width and steel grade set much of the connection capacity.

はい. Welds are an input alongside bolts, for the places in the connection where bolting is not applicable.

Each ratio is the design action divided by the capacity for that check. 以下で 1.0 the component passes; 上 1.0 it is overloaded and the plate, bolts or member need to change.

When the requirements of the project rule out a diagonal. Both resist lateral load without a brace, though a braced bay is usually simpler and cheaper to install.

はい. Along with the utility ratios and capacities, it generates a detailed report of the results that can go into the design file.

SkyCiv接続設計

完全な接続設計ワークスペース. すぐにアクセスできます 80+ 事前構成されたせん断, 瞬間, および複雑な構造接続テンプレート.

今すぐアクセスしてください

直感的なインターフェース

学びやすい, 強力に使える, 直感的なインターフェイスにより、必要なすべての機能にすぐにアクセスできます. ペンツールなどのスマートな機能が満載, 繰り返し/ミラー, および一括編集。ここにコンテンツが入ります

包括的な設計コードのサポート

当社のソフトウェアは幅広い鋼材をサポートしています, 木材, AISCを含む具体的な設計コード, に, AISI, NDS, なので, およびCSA.

APIテクノロジー

SkyCiv は、シームレスな統合を特徴とするカスタマイズされたソリューションです, 簡単な実装, 自動レポートとスケーラブルな設計とアーキテクチャ.

24/7 顧客サポート

SkyCiv は、シームレスな統合を特徴とするカスタマイズされたソリューションです, 簡単な実装, 自動レポートとスケーラブルな設計とアーキテクチャ.

すべての製品を調べる

信頼されている 10,000+ 世界中のエンジニア

強力なクラウドベースの構造解析および設計ソフトウェア

無料で始めましょう