ACI 318-19 钢筋混凝土设计软件

Reinforced Concrete Beam and Column Design to ACI 318-19, 与Structured 3D集成

运行完整工作流程的结构分析软件

SkyCiv 支持 ACI 318-19 – 结构混凝土的建筑规范要求. Reinforced concrete beams and columns can be designed using the standalone RC Design module, or directly from SkyCiv Structural 3D and SkyCiv Beam. Integrated workflows transfer member properties and analysis results into RC Design, allowing engineers to analyse and design reinforced concrete members within the SkyCiv platform.

使用SkyCiv设计混凝土:

Concrete Beams: Comprehensive checks for Rectangular and T-shaped concrete sections to ACI 318-19, 包含:
- 最小允许钢筋
- 细部检查和混凝土覆盖检查
- Concrete flexure checks
- 裂缝宽度检查
- Shear design checks including stirrups
- 详细的计算报告
混凝土柱: Comprehensive checks for Rectangular and Circular concrete sections to ACI 318-19, 包含:
- 细部检查和混凝土覆盖检查
- Combined axial and bending checks
- Strength and capacity checks
- 详细的计算报告
Summary table results and full calculation reports
Design reinforced concrete members to ACI 318-19
Import member properties and analysis results directly from Structural 3D (整合版)
Integrated with SkyCiv Structural 3D and SkyCiv Beam

工程师为何更换

运行完整工作流程的结构分析软件

简单且强大的有限元分析

直线运行, 非线性的, 在单个求解器中进行屈曲和动态分析. 没有用于复杂分析类型的单独模块.

综合设计检查

钢, 木结构, 木材和冷成型设计模块直接运行您的分析结果. 没有导出, 重新输入或版本不匹配.

详细计算报告

每个公式, 设计检查和
参考文献已完整显示, 这样你就可以捍卫每一个号码, 不仅仅是结果.

发现 SkyCiv 钢结构设计的主要特点

What ACI 318 19 Concrete Design Software offers

功能齐全的在线结构分析软件, 包括梁, 板和电缆

单机版结构 3D 分析完整的计算报告 Input Output

单机版: 独立版, 快速 & 可靠

SkyCiv’s standalone ACI 318-19 concrete design tools provide fast, accessible design checks without requiring a complete structural model. Design reinforced concrete beams, 列, 剪力墙, corbels and punching shear, with additional tools for reinforcement development and lap length. Simply enter the required geometry, 材料, reinforcement and design forces to perform ACI 318-19 checks and review your results.

内置于SkyCiv结构3D分析软件中

SkyCiv 的钢筋混凝土设计软件与 Structural 3D 集成, allowing you to analyse your structure and perform ACI 318-19 concrete design checks using results from the same model. 杆件几何形状, 截面, materials and analysis forces can be used directly in the concrete design workflow, 减少程序之间手动传输数据的需要.

Concrete beams and columns can be designed and checked using Structural 3D analysis results, while standalone design is also available when you simply want to enter design forces and perform an individual member check.

完整的计算报告

Review your ACI 318-19 design with clear, 详细的计算报告. SkyCiv 提供计算, 设计假设, 代码参考, checks and design criteria used in the analysis, giving engineers transparency into how each result is determined.

轻松审查管理检查和设计结果, then export professional calculation reports for documentation and project records.

简易输入, 轻松输出

Define your concrete section, 材料特性, reinforcement and design forces through SkyCiv’s simple design interface. Configure longitudinal reinforcement and stirrups, apply the required loading, and perform ACI 318-19 design checks in just a few clicks.

SkyCiv automatically evaluates key concrete design requirements including flexure, shear and reinforcement provisions, with clear utilisation and pass/fail results making it easy to identify governing checks and review the performance of your design.

立即免费开始

skyciv的区别