FREE COLUMN SPLICE CONNECTION CALCULATOR

SkyCiv Sütun Ekleme Bağlantısı Hesaplayıcı

This column splice connection calculator checks the bolted flange plates and web plates joining two W-shaped columns, and returns the capacity and utility ratio for strong-axis moment, gerilim, compression and strong-axis shear. The checks follow AISC 360-16, ASD veya LRFD'de.

Columns in multi-story frames are spliced because a single length cannot be fabricated, transported and handled in one piece. The splice has to pass load and moment from the column above into the column below as though the member were continuous.

Starting SkyCiv Column Splice Connection Calculator...

İçindekiler

Kolon Ekleme Bağlantısı Hesaplayıcı Hakkında

The calculator works on splices between W-shaped columns joined by bolted flange plates and web plates. It evaluates strong-axis moment, gerilim, compression and strong-axis shear from the properties of the columns and plates you enter, reporting each as a capacity and a utility ratio.

Checks follow AISC 360-16 ASD veya LRFD'de, and the output includes the calculations behind the numbers rather than a bare pass or fail.

Sütun Ekleme Bağlantısı Nedir??

A column splice joins two vertical members, usually W-shaped columns, uzunluklarını uzatmak için. Flange plates and web plates are bolted across the joint so the two segments behave as one member.

Splices are what let columns in high-rise construction be fabricated and transported in lengths that can actually be handled. The connection carries axial force, moment and shear, so the frame above is supported as though the column ran uninterrupted.

What Components Make Up a Column Splice?

Four parts make up the connection:

  • W-shaped columns: the vertical members supporting the structure.
  • Flange plates: bolted to the column flanges to transfer bending moment.
  • Web plates: bolted to the column webs to resist shear.
  • Cıvatalar: the fasteners holding the flange and web plates in place.

Together they move load and moment across the splice and keep the two column segments continuous.

Where are Column Splices Commonly Used?

Column splices appear wherever a column runs taller than one fabricated length:

  • High-rise buildings needing column extensions.
  • Çok katlı çerçevelere sahip endüstriyel yapılar.
  • Bridge piers and other infrastructure.
  • Kuleler ve uzun mekanik yapılar.

The calculator suits all of these, because the checks depend on the columns, plates and loads you enter rather than the structure around them.

What Are the Benefits of a Column Splice?

  • Transport and handling: columns can be fabricated in shorter sections that are easier to move and lift.
  • Structural continuity: load transfers between segments, so the spliced column acts as one member.
  • Range of actions: the same detail can be designed for moment, gerilim, compression and shear.
  • Code checks: capacities follow AISC 360-16, ASD veya LRFD'de.

Sütun Ekleme Bağlantısı Hesaplayıcısı Nasıl Kullanılır

Enter the columns, the plates, the bolts and the design actions at the splice. The inputs are:

  • W-shaped column properties: dimensions and material properties of the connected columns.
  • Flange plate details: kalınlık, width and material properties.
  • Web plate details: kalınlık, height and material properties.
  • Bolt specifications: yazarak karşılık gelen bir yük grubu ekleyeceğiz, diameter and arrangement.
  • Tasarım yükleri: strong-axis moment, gerilim, compression and strong-axis shear.

Click calculate. The tool evaluates the utility ratios and capacities and generates a detailed report to keep with the design.

Why Choose SkyCiv for Column Splice Design?

Each check is reported as a capacity next to a utility ratio, so an overloaded plate or bolt group is obvious without reading the whole report, and the workings are shown rather than hidden. It runs in the browser, so a splice can be sized without installing anything.

The full SkyCiv Connection Design module extends that: üzerinde 80+ pre-configured connection types, detailing and clash checks run before the solve, CloudCAD detail drawings, and export of the 3D connection geometry directly to IFC.

İlgili Araçlar

Common questions about designing and checking column splice connections.

Sorularınız Cevaplandı

What does the column splice connection calculator check?

It evaluates strong-axis moment, gerilim, compression and strong-axis shear at the splice, returning a capacity and a utility ratio for each.

Dimensions and material properties for the two columns, the flange plate thickness, width and material, the web plate thickness, height and material, the bolt type, diameter and arrangement, ve tasarım yükleri.

AISC 360-16, ASD veya LRFD'de. Pick the method the project works to and the capacities and utility ratios follow it.

W-shaped columns. The detail relies on flange plates bolted to the flanges and web plates bolted to the webs, so the section needs both.

Because a column taller than one fabricated length cannot be transported or handled in one piece. Splicing lets it be made in shorter sections and joined on site.

The design action divided by the capacity for that check. At or below 1.0 the component passes; yukarıda 1.0 it is overloaded and the plate, bolt group or column has to change.

Evet. Güçlü eksen momenti, gerilim, compression and strong-axis shear are all inputs, and the calculator reports a capacity and a utility ratio for each.

Evet. Alongside the utility ratios and capacities it generates a detailed report, so the calculations can go into the design file.

SkyCiv Bağlantı Tasarımı

Eksiksiz bağlantı tasarımı çalışma alanınız. Anında erişim sağlayın 80+ önceden yapılandırılmış kesme, an, ve karmaşık yapısal bağlantı şablonları.

Bugün erişim sağlayın

Sezgisel arayüz

Öğrenmesi kolay, kullanımı güçlü, sezgisel arayüz, ihtiyacınız olan tüm özelliklere hızlı bir şekilde erişmenizi sağlar. Kalem aracı gibi akıllı özelliklerle donatılmıştır, hızlı modelleme yeteneği, iş verimliliğiniz için çok önemlidir, ve Toplu Düzenleme.İçeriğiniz Buraya Gelecek

Kapsamlı Tasarım Kodu Desteği

Yazılımımız kapsamlı bir çelik yelpazesini destekler, Odun, ve AISC dahil beton tasarım kodları, İÇİNDE, AISI, NDS, GİBİ, ve CSA.

API Teknolojisi

SkyCiv kusursuz entegrasyonlara sahip özelleştirilmiş bir çözümdür, kolay uygulamalar, otomatik raporlar ve ölçeklenebilir bir tasarım ve mimari.

24/7 Müşteri desteği

SkyCiv kusursuz entegrasyonlara sahip özelleştirilmiş bir çözümdür, kolay uygulamalar, otomatik raporlar ve ölçeklenebilir bir tasarım ve mimari.

Tüm Ürünleri Keşfedin

Tarafından güvenilen 10,000+ Dünya Çapındaki Mühendisler

Güçlü bulut tabanlı yapısal analiz ve tasarım yazılımı

Ücretsiz Başlayın