SkyCivドキュメント

SkyCivソフトウェアのガイド - チュートリアル, ハウツーガイドと技術記事

詳細なシェル FEA

  1. ホーム
  2. 詳細なシェル FEA
  3. ビーム シェル FEA – 入門
  4. チュートリアル 2. メンバーシェルFEA

チュートリアル 2. メンバーシェルFEA

例の概要

この例では, we’ll demonstrate how to analyze a beam stiffened with horizontal and vertical elements and subjected to axial and shear forces. The beam has a length of 4000 mm and is reinforced with two horizontal stiffeners having a closed section, as well as three vertical stiffeners. The top and bottom flanges have a thickness of 16 んん, the web is 10 mm thick, the longitudinal ribs are 5 mm thick, and the vertical stiffeners are 15 mm thick. The beam’s ends are configured with rolled and pinned boundary conditions. The beam subjected to an axial load of 15000 kN and shear forces of 2000 kN. The materials have a yield strength (fy) の 355 MPa.

The upcoming analysis will encompass both geometric and material nonlinearity. It also offers real-time tracking of the load-displacement curve, enabling an in-depth investigation of the member’s capacity while optimizing computational time. The results will provide insights into the member’s capacity, its deformed state, and its failure status.

ステップ 1. Model Parts

Go to the ‘Main Partsmenu and select the ‘PROFILE’ タブ. To input the sections’ ジオメトリ, import a DXF file stored locally on your PC. The dxf file can be received from ここに

Click ‘Update t’ button. Pick side edges (21,8) and set thickness (t) に 0 んん.

Navigate to the ‘SCHEME’ タブ. Configure two segments, setting the length of each to 2000 んん. When you click on the ‘Updated plate tcolumn cell, a popup window will appear. In this window, update the thickness for each segment’s edges: set top flanges to t=16 mm, the web to t=10 mm, and ribs to t=5 mm.

Add diaphragms to the sections, selecting the ‘Polygon’ タイプ. The edges for the diaphragm are defined in a popup window that appears when you click on the ‘Diaphragm Edgescolumn cell. In the ‘DIAPHRAGM INPUT’, select the edges that form the diaphragm shape and input the thickness (t).

ステップ 2. かみ合い

Navigate to the ‘Meshing’ メニュー. Set the FE element size to 50 んん, then click the ‘Generate’ ボタン.

ステップ 3. Boundaries and Load

Navigate to the ‘Boundaries‘ > ‘Rigid Ends’ menu. Set the end boundary constrains. Navigate to the ‘Loads‘ > ‘Rigid Ends’ menu. Apply an axial load of 15000 kN to the left end of the member for compression.

Go to the ‘Loads > ‘Force Area (カスタム)‘ menu. Add a new Load group named ‘Group: 1」. Select the elements both above and below the central vertical stiffener, and then assign a shear load Fz of 2000 kN

ステップ 4. Analysis and Load-Displacement tracking

Navigate to the ‘Analysis‘ menu. Select Nonlinear Explicit including geometry and material nonlinearity. Click ‘Perform Analysis’ button.

 

 

While the analysis is in progress, navigate to ‘Chart’ menu. 最初, select a node to measure the Ux displacement (ステップ 1 そして 2). その後, using frame selection, choose nodes from which to extract the Rx reaction forces (ステップ 3 そして 4). Monitor the chart’s changes to identify the critical force (Pcr) that leads the structure to failure. Terminate the ongoing analysis once the failure state is detected.

 

ステップ 5. 結果

Navigate to the ‘Results’ メニュー, choose your preferred results options, and click ‘Displayto view the deformed state of the model.

この記事は役に立ちましたか?
はい 番号

どのように我々は助けることができます?

トップへ戻る