SkyCiv Documentation

Your guide to SkyCiv software - tutorials, how-to guides and technical articles

SkyCiv Connection Design

  1. Home
  2. SkyCiv Connection Design
  3. Design of Steel Connections using AISC 360-16
  4. AISC 360-10 HSS-to-W
  5. Double WT

Double WT

As the name implies, the double WT connection uses two WT sections to create a moment connection. Both WT sections are mounted on the top and bottom flanges of the child member.

Double WT Moment Connection

Design

A double WT connection is considered to be one of the cheaper alternatives to the Through Plate Connection and Collared Plate Connection as it only requires extra bolting or welding for the WT sections to the HSS column.

Best Practices

  • The double WT connection can be prone to high prying loads on the welds of the HSS column, therefore it is better to over design the welds use
  • The depth of the WT flange should not be wider than the flange of the child member.
  • The web flange of the WT shape should not extend too long to prevent a higher moment load acting on the welds
Was this article helpful to you?
Yes No

How can we help?

Go to Top